condition of the property are the heating and air conditioning systems. Have an expert assess that they are the appropriate models and capacity, and that they are working properly. Check the electrical panel. It should not be old or outdated, must be easily accessible, and in good working condition. Ensure wiring was done properly. You do not want to spend a fortune rewiring the home to bring it up to standard. Consider if there are enough power outlets and if they are in good condition. Inspect basements and attics (if applicable). Check the attic for water leakage issues. Look for water damage or leaks that may have affected the insulation, walls, and ceiling of the attic. Make sure the insulation is adequate for where the property is located. In the basement, look for evidence of moisture problems. Is there water leaking onto the floor or water around the foundation? There should be no cracks in the basement walls, and any wood, such as those in exposed beams, should be in good condition with no rot. Look at pipes and turn on taps. Check that the plumbing is up- to-date. Run taps to ensure they work properly and the water pressure is strong enough. Exposed pipes in unheated areas should be insulated, as frozen pipes will eventually cause water damage. It is particularly important from a health perspective to determine that the pipes are not made of lead. If they are, you will have to replace them. Also, check the age and condition of the hot water heater. Is the exterior of the home in good shape and well-maintained? Check for evidence of water around the foundation, which may indicate drainage issues. The ground should slope away from the foundation. If there is a porch, it should have a foundation, not simply sit on soil. Check that driveways and walkways leading up to the house do not have cracks and are not crumbling. Check that the siding of the home is in good repair. Look at the landscaping on the property. It should not be unkept and
45
Powered by FlippingBook